Why Spightdex N12 LED RF Mini Dimmer? The N12 single color LED dimmer is designed to drive constant voltage LED products in the voltage range of DC5-24V. The main unit works with an RF remote controller, allowing users to adjust the LED brightness using the remote. The main unit is powered by a DC power supply and receives remote controller commands to drive LED fixtures.

Remote Indicator The indicator blinks when the remote controller is working. If the indicator flashes slowly when pressing keys, it means the remote battery is nearly empty, and the battery (model CR2032) should be changed.

Brightness Control Press the upward key to increase brightness and the downward key to decrease. The brightness will change smoothly when holding these two keys. The controller applies brightness gamma correction on dimming control, making the brightness tuning more smooth to human sense.

Protection Function The main unit has full protection function for wrong wiring, output short circuit, overload, and overheat. The controller will protect itself from damage under these extreme conditions and could automatically recover when the working condition is good. To avoid the protection, ensure the LED fixtures are capable of constant voltage driving and within the rated range, and the cables are well connected and insulated.

Pairing a New Remote Controller The remote controller and main unit are factory default 1-to-1 paired. It's possible to pair a maximum of 5 remote controllers to one main unit, and each remote controller could be paired to any main unit.

Work Status Indicator - Steady green: Normal working - Single green blink: Command received - Long single green blink: Mode or color cycle edge - Long single yellow blink: Reach brightness limit - Red flash: Overload protection - Yellow flash: Over heat protection - Green flash 3 times: New remote controller paired

For Single LED Strip Only The N12 single color LED dimmer is designed to drive constant voltage LED products in the voltage range of DC5-24V. The main unit works with an RF remote controller, and users can adjust the LED brightness on the remote controller. The main unit is powered by a DC power supply and receives remote controller commands to drive LED fixtures.

Compact Size with Powerful Connection The main unit has a small, compact size of 87mm*24mm, but with a 10A current output and a 5-24V wide voltage range, as well as full protection for safe use.

Dimmable with Remote Control Brightness grade 11 levels, remote frequency 433.92MHz, remote control distance >15M.

Easy Operation Connect LED fixtures to the terminal. Install the positive LED load cable into the terminal marked with '+' and the negative cable into the terminal marked with '-'. The two positive jacks are connected inside the controller, and so are the negative jacks. Ensure the LED rated voltage matches the power supply, and the maximum load current is lower than the controller's rated current.

Cover Patent Design Patent design for the cover, no need for screws, easy to take out and push back by hand, high efficiency, and time-saving.

High Quality and Safety FCC, CE, and Rohs certification, high quality for safety protection.

Friendly After-sales Service A hassle-free, friendly support experience with a team available via email, phone, or online chat.

product information: